EN
5
1. PREFACE
1.1 General
Congratulations on choosing the MinarcTig equipment. Used correctly,
Kemppi products can signicantly increase the productivity of your welding,
and provide years of economical service.
This operating manual contains important information on the use,
maintenance and safety of your Kemppi product. The technical
specications of the equipment can be found at the end of the manual.
Please read the manual carefully before using the equipment for the rst
time. For your own safety and that of your working environment, pay
particular attention to the safety instructions in the manual.
For more information on Kemppi products, contact Kemppi Oy, consult an
authorised Kemppi dealer, or visit the Kemppi web site at www.kemppi.com.
The specications presented in this manual are subject to change without
prior notice.
Important notes
Items in the manual that require particular attention in order to minimise
damage and personal harm are indicated with the ’NOTE!’ notation. Read
these sections carefully and follow their instructions.
Disclaimer
While every eort has been made to ensure that the information contained
in this guide is accurate and complete, no liability can be accepted for any
errors or omissions. Kemppi reserves the right to change the specication of
the product described at any time without prior notice. Do not copy, record,
reproduce or transmit the contents of this guide without prior permission
from Kemppi.
1.2 Machine properties
MinarcTig machines are compact and robust direct current welding
machines suitable for MMA and TIG welding. Extremely light in weight for
their output power, the machines are easy to carry to the work place with
either the inbuilt moulded carry handle or the shoulder strap provided.
The 180 and 180 MLP models can be used in regular lighting circuits, i.e.,
in single-phase electric networks. The 250 and 250 MLP models require a
three-phase network.
5© Kemppi Oy / 1339
To Next Page
Loading...
Need help?
General
