EN
7
2. MACHINE USE
2.1 Before commissioning the machine
MinarcTig is packed in purpose made, recyclable packaging. However,
always ensure that the equipment has not been damaged in transportation.
Even so, make sure that all in-transport damage is reported to the machine
supplier. Do not unpack the machine under these circumstances. In addition,
before commissioning, check that you have received all of the items you
ordered along with their operating instructions.
Transportation
The machine should be transported in an upright position.
Environment
The machine is suitable for both indoor and outdoor use. In outdoor use,
protect it from heavy rain and sunshine. Store the machine in a dry and
clean environment and protect it from sand and dust during use and
storage. The recommended operating temperature range is –20 to +40
degrees centigrade.
Site the machine so that it does not come into contact with hot surfaces,
sparks and welding spatter. Make sure the airow to and from the machine
is unrestricted.
7© Kemppi Oy / 1339
To Next Page
Loading...
Need help?
General
