WFX 200, 300, 200 P Fe/Ss, 300 P Fe/Ss, 200-T, 300 P-T, 300-T, 200 AMC, 300 AMC
28
EN
6. DISPOSAL OF THE MACHINE
Do not dispose of electrical equipment with normal waste!
In observance of European Directive 2002/96/EC on waste electrical and electronic
equipment, and its implementation in accordance with national law, electrical equipment
that has reached the end of its life must be collected separately and taken to an appropriate
environmentally responsible recycling facility.
The owner of the equipment is obliged to deliver a decommissioned unit to a regional
collection centre, as per the instructions of local authorities or a Kemppi representative. By
applying this European Directive you will improve the environment and human health.
7. ORDERING CODES
WFX 200 wire feeder 200 mm, regular pulse welding 6103520
WFX 300 wire feeder 300 mm, regular pulse welding 6103530
WFX 200 P Fe wire feeder 200 mm, pipe welding, steel 6103521
WFX 300 P Fe wire feeder 300 mm, pipe welding, steel 6103531
WFX 200 P Ss wire feeder 200 mm, pipe welding, stainless steel 6103522
WFX 300 P Ss wire feeder 300 mm, pipe welding, stainless steel 6103532
WFX 200 AMC wire feeder 200 mm, intelligent pulse welding 6103523
WFX 300 AMC wire feeder 300 mm, intelligent pulse welding 6103533
WFX 200-T wire feeder 200 mm, tailored 6103524
WFX 300 P-T wire feeder 300 mm, tailored 6103535
WFX 300-T wire feeder 300 mm, tailored 6103534
Cables
Earth return cable 5 m, 50 mm² 6184511
Earth return cable 5 m, 70 mm² 6184711
MMA welding cable 5 m, 50 mm² 6184501
MMA welding cable 5 m, 70 mm² 6184701
Magnetic clamp (voltage sensing cable) 200 A 9871580
Magnetic clamp (earth return cable) 600 A 9871570
Interconnection cables, air-cooled
FASTMIG X 70-1.8-GH 1.8 m 6260468
FASTMIG X 70-5-GH 5 m 6260469
FASTMIG X 70-10-GH 10 m 6260470
FASTMIG X 70-20-GH 20 m 6260471
FASTMIG X 70-30-GH 30 m 6260472
– For other lengths, please contact Kemppi.
To Next Page
Loading...
Need help?
General
