Kemppi WFX 300 User Manual

WFX 200, 300, 200 P Fe/Ss, 300 P Fe/Ss, 200-T, 300 P-T, 300-T, 200 AMC, 300 AMC
10
EN
2.8 GT04 wire feed mechanism
This is used in WFX 300 P Fe, WFX 300 P Ss and WFX 300 P-T wire feeders.
Wire guide tubes
ø mm outlet tube middle tube inlet tube
Al, Ss (Fe, Mc, Fc)
plastic
0.6 SP007285 SP007273 SP007293
0.8 – 0.9 SP007286 SP007274 SP007294
1.0 SP007287 SP007275 SP007295
1.2 SP007288 SP007276 SP007296
1.4 SP007289 SP007277 SP007297
1.6 SP007290 SP007278 SP007298
2.0 SP007291 SP007279 SP007299
2.4 SP007292 SP007280 SP007300
Fe, Mc, Fc
metal
0.8 – 0.9 SP007454 SP007465 SP007536
1.0 SP007455 SP007466 SP007537
1.2 SP007456 SP007467 SP007538
1.4 – 1.6 SP007458 SP007469 SP007539
2.0 SP007459 SP007470 SP007540
2.4 SP007460 SP007471 SP007541

Kemppi WFX 300 Specifications

General

Brand	Kemppi
Model	WFX 300
Category	Welding System
Language	English