What to do if Ken Dishwasher shows 'CHANGE WASH WATER'?
The maximum number of washes is set in the machine settings. At code #53, stop the machine, discharge the water, and clean it before the next start.
What to do if Ken DW 412 has missing water pressure?
The water filling has lasted too long according to the programmed time, which corresponds to a water pressure of 0-1 bar in the connection to the machine. Open the stop cock.
General| Brand | Ken |
|---|---|
| Model | DW 412 |
| Category | Dishwasher |
| Language | English |
Details the development and purpose of this instruction manual.
Covers general safety aspects and compliance with EU directives.
Outlines potential hazards and necessary precautions for operator safety.
Further guidance on personal safety concerning transport and installation.
Discusses environmental protection, resource consumption, and material recycling.
Provides instructions for the proper disposal of the machine and its components.
Presents diagrams and measurements for machine placement and overall dimensions.
Lists detailed specifications, dimensions, capacities, power requirements, and materials.
Steps for inspecting the machine for damage during transit and upon unpacking.
Instructions on how to correctly dispose of the machine's packaging materials.
Details on connecting the machine to table, water supply, and drainage.
Covers electrical setup, pump rotation, rinse aid, and detergent settings.
Explains the functions of the control panel buttons, lights, and display.
Step-by-step guide for powering on and preparing the machine for operation.
How to select programs, start wash cycles, and understand operational feedback.
Instructions for changing the machine's water supply, with or without a drain pump.
Steps for safely replacing an empty detergent canister.
How the machine signals and manages operational issues and errors.
Advice on pre-rinsing, loading tableware, and optimizing wash results.
Details the available wash programs and their constituent steps.
Explains how to choose between different wash pressure settings for programs.
Specifies daily cleaning tasks and checks to maintain machine hygiene.
Outlines regular inspections and lubrication for sustained machine performance.
Properties, care instructions, and potential issues related to stainless steel surfaces.
Guidelines to maintain stainless steel's corrosion resistance with proper cleaning.
Using water washes to prevent corrosion and maintain surface appearance.
Methods for effectively removing various stains and discoloration from stainless steel.
Guide on entering the machine's computer control and using navigation keys.
Overview of the Main Menu options and how to navigate through them.
Detailed steps for accessing and using the detergent consultant menu for calibration.
Instructions on how to adjust the rinse aid pump for optimal detergent dosage.
Step-by-step process for calibrating detergent dosing using conductivity measurements.
Attaching detergent settings to programs and exiting the calibration menu.
Details the components and function of the machine's exhaustion system.
Information regarding the connecting joint used for the exhaustion pipe.
Explains how connecting the exhaustion system enhances the work environment.
Provides data on air volume and potential condensation in the ventilation system.
Explains how errors are indicated and the distinction between essential and unessential errors.
A concise list of frequently encountered error codes with brief explanations.
Covers causes and remedies for errors related to water pressure and heating elements.
Addresses causes and solutions for errors concerning water levels, heating, and detergent systems.
Details causes and remedies for errors related to drainage, hood, sensors, and control modules.
Refers to separate instructions for setting up the KEN NetCom system.
Information logged by KEN NetCom regarding machine usage statistics.
Data on current temperatures, wash counts, and operating time from KEN NetCom.
Information on the electronic technician log for diagnostic purposes.
Details logged in the service log, including warnings and error occurrences.
Specifies the factory guarantee duration and the scope of coverage.
Lists the circumstances under which the product guarantee is invalidated.
Instructions on how to contact the service department for assistance with machine malfunctions.
A table detailing factory and user adjustable machine parameters.
Further adjustable parameters for heating, pumps, detergent capacity, and standby time.
Additional adjustable parameters covering sensors, communication, daily checks, and autostart.
Detailed settings for each wash program, including timings, temperatures, and pressure.
Specific adjustments for detergent dosage, sensitivity, and pre-dosing time.
To Next Page