Section/page:3.2
Technical description
KEN DW 410
Subject to alterations 17/9/2013
Technical data
Basket dimensions: Square, max 500 x 500 mm
Round, max. ø540
Washing area (W x D x H): 600x540x450 (inside volume)
Washing and rinsing system: Rotary washing and rising system
Rinse water consumption per wash: 2,4 litres
Nozzle pressure washing system: 5/9 (low/high) mVc
Wash tank capacity: 30 litres
Water intake at refill: 25 litres
Minimum water pressure
(flow pressure):
200 kPa at 15 litres/min
Maximum water pressure: 800 kPa
Electrical connection: Standard 3x400 V-N-earth 50 Hz
Special voltage on assignment
Connecting power / fuse: Standard: 9,9 kW / 16Amp.
Heating elements: Standard: Wash tank 9kW-Rinse tank 9kW.
Water connections: 3/4” pipe thread, temperature: standard 50° C, max.
60°C. Connection to cold water possible
Drain: Ø32 mm
Drainage flow: Max. 0,5 L/sec.
Programs: P1: 1min. 42sek., P2: 2min. 42sek.
P3: 4min. 42sek. P4: 10min. 42sek.
Hood material: Moulded polyurethane integral foam
Colour, standard: RAL 7021 antracite grey
Colour, alternatives: On assignment
Hood lifting: Automatic. Locked during program.
Noise level: 65,5 dB(A) (high wash pressure)
Surface temperature: Hood max. 45°C
Rinse aid dosage: Integrated pump
Automatic detergent dosage: Integrated pump and control for all types of detergent
Solid detergent: Prepared
Steam heating: Optional equipment.
Steam condenser: Optional equipment.
Exhaustion, connecting branch and
electric control:
Standard at right side of machine. Ventilation pipe
ø100 - ø160 mm.
VA-approval: No. VA 3.44 / 17123
Operation panel: Pushbutton panel
Control: Microprocessor :
Program cycle, rinse temperature and error text
appear on the display
Optional customer adapted programs
Height adjustable system Optional equipment
NetCom Optional equipment
To Next Page
Loading...