KEN DW 412 Section/page:1.1
Subject to alterations 17/9/2013
General
Introduction
KEN Machines are developed and tested in cooperation with hospitals and
laboratories to ensure optimal functionability and reliability of operation, as
well as to ensure that personal safety and environmental protection are
given pride of place.
To attain this goal it is important that you follow the factory
instructions concerning installation, start-up and use of the machine.
We therefore ask you to read these instructions carefully before you
start using the machine.
If you contact us concerning the use of the machine, available baskets,
servicing and ordering of spare-parts, please state the following information:
Machine type:
Machine No.:
Information on the EU Declaration of conformity is available in section 13.
This instruction manual
This instruction manual has been made to cover the widest possible range
of combinations, which means that features may be described herein that
are not found on the machine you have acquired; conversely, a few of the
details on your machine may not be described in this manual.
If you need more information about any such detail, please do not hesitate
to contact our service department.
To Next Page
Loading...