Section/page:10.2
Detergent consultant
KEN DW 412
Subject to alterations 17/9/2013
-calibrating detergent by condutivity dosing, continued
11. To attach the different detergent adjustments to the programs, please
enter ”PROGRAM SETTINGS” in “DETERG.CONSULT.”.
12. Select program1-4.
13. Press key 2.
14. Select “CALIBRATION A,B,C or D”.
15. Press key 2.
Repeat point 11-15 until the wanted number of detergent adjustments are
reached.
When calibrating is ended leave the “DETERG.CONSULT.”-menu by
pressing key 4 repeatedly.
The machine is now ready for use.
If an external detergent supplier or time controlled detergent dosage is
wanted, see section 8 -
“DETERGENT CONSULTANT/SET DETER.DOSAGE”.
KEN is willing to inform about supplier of detergent which is to be used in
the machine.
To Next Page
Loading...