In addition to the obvious controls of your machine, there are other small
regulators and controls to aid you in using your sewing machine.
Push down the outer ring of the pressure regulator. This will release the pressure
on the presser foot. (See above).
To increase the pressure, push down inner pin until a suitable pressure is
obtained.
Insufficient pressure may cause poor feeding of the fabric, skipped stitches, or
difficulty in guiding the fabric. If feed dogs or presser foot marks appear on the
fabric, reduce the pressure.
When sewing multiple thickness or heavy fabric, reduce the pressure. Increase
pressure when sewing lighter weight fabrics.
To Next Page
Loading...
