Inside of
1. Finish edge of hem anyway you
desire. Turn up hem appropriate
width. (Fig. 1)
Fig. 1
2 Fold garment away from hem
leaving 1/8" of hem edge extending.
(Fig. 2)
3. Place garment under presser foot in
such a manner that straight stitches
will be sewn on extended edge.
The zigzag stitch should just catch
the fold of the garment. (Fig. 3)
4. Press both sides of the finished hem.
The right side of the garment will
show only the blind stitches. (Fig. 4)
Fig. 4
To Next Page
Loading...
