Step2
3.
Set stitch selector at4_]. Stitch
forward until you approach the front
marking of the buttonhole. Stop
sewing at the left stitch and raise
needle to its highest position.
_- _=
Step 3
4,
Set stitch selector at E] again and
bartack several times. Raise needle
at its highest position.
J
Step 4
5. Set stitch selector at [_l'to finish
buttonhole.
f the forward stitching does not exactly match the reverse stitching, slightly adjust
the stitch length control during forward sewing.
Always make a practice buttonhole on a scrap of fabric you plan to use. Try the
buttonhole with the button you will use,
Always use an interfacing in area of garment where buttonholes are placed. Tissue
paper or regular interfacing can be used. Tear paper away after stitching, if it is used.
For heavier weight fabrics, loosen your top tension slightly.
To Next Page
Loading...
