/
A
Carefully mark the buttonhole length
on your garment. Place the fabric
with the buttonhole marked under
the buttonhole foot. Pull the guide
foot (A) all the way forward so that
the index mark (B) is aligned with the
graduation (C), with thread to rear.
(Reproduction of the identical size
buttonholes is facilitated with the aid
of the graduations on the left side of
the buttonhole guide foot. These
graduations are 1/8" apart. Gradua-
tions act as reference mark.)
?
H
Step 1
2, Set stitch selector at N and bartack
several times at the marked be-
ginning of the buttonhole. Stop
sewing at the left stitch. Raise
needle to its highest position by
turning handwheel toward you
manually.
To Next Page
Loading...
