Kenmore KM5K - Technical Specifications

Getting To Know Your Water Optimizer
Getting To Know Your Water Optimizer 6
Technical Specications
Model KM5K
Rated Power 520 Watts
Heating Power 420 Watts
Refrigeration Power 90 Watts
Water Production Power 10 Watts
Rated Pure Water Flow 0.32 gal/min [43.5 psi] (1.2 L/min [0.3 MPa])
Hot Water Production 1.01 gal/hr ≥ 185°F (4 L/hr ≥ 85°C)
Hot Water Storage 0.26 gal (1 liter)
Cold Water Production 0.53 gal/hr ≤ 50°F (2 L/hr ≤ 10°C)
Cold Water Storage 1.1 gal (4.16 liters)
Environmental Temperature Requirements 40°F - 100°F (4.44°C - 37.78°C)
Environmental Humidity Requirements ≤ 90%
Water Pressure Requirements 14.5 psi - 58psi (0.1 MPa - 0.4 MPa)
Water Source Quality Tap Water
Appliance Size 12.25 in. (310 mm) x 14.17 in. (360mm) x 40.94 in. (1040 mm)
Appliance Weight 40.6 lbs (18.4 kg)
Operating Pressure (all lters) 14.5 ~ 58 PSI
Operating Temperature (all lters) 34°F ~ 100°F
PH Range (all lters) 5 - 10
Max Hardness (all lters) Below 300 ppm
Pod Filter #1 Details Sediment Depth Filter
Material: PP (Polypropylene)
Flow Rate: 0.79 gpm Pore Size: 10 microns
Lifespan: 950 gal / 6 - 12 months
Pod Filter #2 Details GAC (Granular Activated Carbon)
Material: Coconut
Flow Rate: 0.79 gpm Passage Size: 12 - 40 Mesh
Lifespan: 1900 gal / 18 - 24 months
Pod Filter #3 Details Ultra Filtration (UF) Membrane Passage Mineral Filter
Material: PE (Polyethylene)
Flowrate: 0.53 gpm Pore Size: 0.1 - 0.02 microns
Lifespan: 1425 gal / 12 - 18 months
Pod Filter #4 Details Post Carbon Block
Material: Coconut Based
Flow Rate: 0.79 gpm Pore Size: 7 microns
Lifespan: 950 gal / 6 - 12 months