Kentec Electronics Sigma A-CP - Introduction

Section 1
Introduction
This manual describes conventional detection models of the Sigma A-CP Fire Control Panel. These
models can include or exclude dialer communication.
Models including dialer communication are the 2 zone K1852, 4 zone K1854 and 8 zone K1858.
Models excluding dialer communication are the 2 zone K1842, 4 zone K1844 and 8 zone K1848.
Power supply options of these models are available for 115 VAC or 230 VAC and cabinet colors are
available in red or gray.
Reference Appendix B, Equipment list of this manual for a complete description of features available for the
Sigma A-CP Fire Control Panel.
This section describes:
 Using This Manual
 Related Documentation
 Document Conventions
 If You Need Help
 Contacting Kentec For Repair
The figure below illustrates the Sigma A-CP Fire Control Panel:
Figure 1-1
Sigma A-CP Fire Control Panel
www.acornfiresecurity.com
www.acornfiresecurity.com