Kenwood Basic M1D - Before Operation; Installation Guidelines; Operating Safety Measures; Cleaning the Unit

Before operation
Notes on installation
Do not place the unit in a place which is exposed to’
direct sunlight, near a heating appliance, etc.
Do not place a vase containing water, makeup, etc. on
the unit. Do not use in a humid place.
‘s
To maintain good ventilation, do not put records or a
table-cloth on the unit. Place the unit at least 10 cm
away from the walls.
Choose a location that is relatively tree irom vibration or
excessive dust. |
CYS
Safety precautions
Never remove the case. If the internal parts are touch-
ed, accidentally, a serious electric shock might occur.
-Never touch internal parts.
If a metal object, such as a hair pin or a needle, comes
into contact with the power socket on the rear panel, a
dangerous electric shock may result. For families with
children, never permit children to put anything,
especially metal, inside this unit. |
Do not connect other audio equipment with a power
consumption larger than that specified to the AC outlet
on. the rear panel. Never connect other electrical
appliances, such as an iron or toaster.
on Never connect other
_/ electrical appliances.
Touching the power plug when your hands are wet
may result in a serious electric shock.
Never pull, bend or extend the power cord. This could
damage the power cord, resulting in a broken cord or
short-circult.
~ Never pull or stretch
the cord. |
In case of abnormal smell
If an abnormal smell or smoke is detected, immediately
turn the power OFF and pull out the power cord. Con-
tact your dealer or nearest KENWOOD service station.
Cleaning
Do not use volatile solvents such as alcohol, paint thin-
ner, gasoline, benzine, etc. to clean the cabinet. Use a_
silicone cloth or a clean dry cloth.
Silicone cloth Thinner Benzine