Kenwood Basic M1D - Specifications; Power Output Details; General Technical Data

Specifications
Power Output
125 watts per channel minimum RMS, both |
channels driven, at 8 ohms from 20 Hz to
‘20,000 Hz with no more than 0. 008% total
harmonic distortion
Maximum Continuous
Power Output (DIN) oe
at 1 kHz into4 ohms............150 W
Dynamic Power
at 1 kHz into 4 ohms............ .240 W
Damping Factor |
at 50 Hzinto 8 ohms ..........:..1,000.
Power Bandwidth =|
at 0.08% T.H.D. into 8 ohms ..10 Hz to 75 kHz
Total Harmonic Distortion
20 Hz to 20 kHz ........,..........0.008% at rated power into
8 ohms
TKHZ. 020... cece esses, 0.0008% at rated power into
8 ohms .
Frequency Response ................. 10 Hz to 100 kHz,
+0,.—3 dB
Signal-to-Noise Ratio.................120 dB
Input Se ernre
LINE IN.. Vii aed WIT KORIIS
General
Power Consumption ................. 4.5 A (U.S.A. and Canada)
270 W (Others)
Dimensions .................2..6006...W 440 mm (17-5/16”
: H 143mm __ (5-5/8”)
| D 338mm _ (13-5/16”)
Weight (net)... cecccceeeee- 9.8 kg (21.6 lb)
We follow a policy of continuous advancements in ‘developments. For this reason h specifications n may be changed v without notice.