Kenwood DMX9707S User Manual

Connection/Installation
103English
Ñ Removing the unit
1) Remove the trim plate. (P.102)
2) Insert the two extraction key (accessory 5)
deeply into the slots on each side, as shown.
5
3) Lower the extraction key toward the bottom,
and pull out the unit halfway while pressing
towards the inside.
NOTE
• Be careful to avoid injury from the catch pins on
the extraction key.
4) Pull the unit all the way out with your hands,
being careful not to drop it.

Kenwood DMX9707S Specifications

General

Brand	Kenwood
Model	DMX9707S
Category	Car Video System
Language	English