Kenwood eXcelon KDC-X492 User Manual

2
|
KDC-X492/KDC-MP438U/KDC-MP408U/KDC-MP338
Contents
Before use 3
Basic Operation 4
General functions
Tuner functions
Disc & Audio file play functions
General Operation 6
Audio Control
Adjusting the detail of Audio Control
Audio Setup
Speaker Setting
Display Switching
Tuner Operation 9
Direct Access Tuning
Frequency Step Setting
Music disc/Audio file Operation 10
Play Functions of Disc Changer
Direct Music Search
Direct Disc Search
List Select
iPod Select
Track Select
Menu Operation 12
Menu System
Activating Security Code
Deactivating Security Code
Manual Clock Adjustment
AMP Control
Auxiliary Input Display Setting
Receive mode Setting
Demonstration mode Setting
Basic Operations of remote control 15
Appendix 16
Accessories/ Installation Procedure 18
Connecting Wires to Terminals 19
Installation 20
Troubleshooting Guide 21
Specifications 23
• iPod is a trademark of Apple Inc., registered in the U.S.
and other countries.
• The "AAC" logo is trademark of Dolby Laboratories.
Playing AAC, MP3, and WMA data
This document refers to AAC, MP3, and WMA
data stored in iPod, USB device, and CD-R/RW as
"audio files." Refer to the section on "Audio Files" to
control these data. See <About Audio file> (page
16) for details.
Panel illustrations used in this
document
The control panel for KDC-X492 is used to describe
operations in this document.
B64-3955-00EnglishKr1.indd2B64-3955-00EnglishKr1.indd2 07.11.125:19:53PM07.11.125:19:53PM

Kenwood eXcelon KDC-X492 Specifications

General

Brand	Kenwood
Model	eXcelon KDC-X492
Category	Car Receiver
Language	English