To Next PageTo Next Page
Need help?Do you have a question about the Kenwood eXcelon KDC-X991 and is the answer not in the manual?
FM Tuner Section| frequency range | 87.9 MHz – 107.9 MHz |
|---|---|
| usable sensitivity | 9.3 dBf (0.8 μV/75 Ω) |
| quieting sensitivity | 15.2 dBf (1.6 μV/75 Ω) |
| frequency response | 30 Hz – 15 kHz |
| signal to noise ratio (MONO) | 70 dB |
| selectivity | ≥ 80 dB |
| stereo separation | 40 dB |
AM Tuner Section| frequency range | 530 kHz – 1700 kHz |
|---|---|
| usable sensitivity | 28 dBμ (25 μV) |
CD Player Section| spindle speed | 1000 – 400 rpm (CLV 2times) |
|---|---|
| frequency response | 10 Hz – 20 kHz |
| total harmonic distortion | 0.008 % |
| signal to noise ratio | 110 dB |
| dynamic range | 93 dB |
USB Interface| usb standard | USB 1.1/ 2.0 |
|---|---|
| maximum supply current | 500 mA |
| file system | FAT16/ 32 |
Audio Section| maximum output power | 50 W x 4 |
|---|---|
| full bandwidth power | 22 W x 4 |
| speaker impedance | 4 – 8 Ω |
| tone action band 1 | 60 – 200 Hz ±9 dB |
| tone action band 2 | 250 – 1k Hz ±9 dB |
| tone action band 3 | 1.25k – 4k Hz ±9 dB |
| tone action band 4 | 5k – 16k Hz ±9 dB |
| preout level / load | 5000 mV/10 kΩ |
| preout impedance | ≤ 80 Ω |
Auxiliary Input| frequency response | 20 Hz – 20 kHz |
|---|---|
| input maximum voltage | 1200 mV |
| input impedance | 100 kΩ |
General| operating voltage | 14.4 V |
|---|---|
| current consumption | 10 A |
| installation size | 182 x 53 x 155 mm |
| weight | 3.31 lbs (1.5 kg) |
Advises on preventing injury, safe driving practices, and handling the product responsibly.
Precautions regarding grounding, environmental exposure, fuse replacement, and physical handling to prevent damage.
Instructions for attaching the panel and warnings against loading 3-inch CDs with adapters.
Details on connecting CD players/changers and managing lens fogging for optimal playback.
Procedure for resetting the unit to factory settings, including precautions for USB devices.
Guidelines for cleaning the unit and faceplate, and initial setup before first use.
Information regarding the attached KENWOOD Music Editor PC application for file management.
Details on supported audio file formats, disc media, USB devices, and file systems.
Guidance on USB device installation, data backup, and limitations related to USB hubs and cable length.
Explanation of the ODD D/A System and how Dual Zone System setting affects it.
Instructions for dialing, registering, and deleting phones via Bluetooth.
Guidance on handling CDs properly and identifying discs that cannot be used.
Instructions on how to turn the unit's power ON and OFF.
Methods for selecting different audio sources like Tuner, USB, CD, etc.
How to adjust volume, use the attenuator, and activate loudness control for better sound.
Adjusting audio parameters such as rear volume, subwoofer level, balance, and fader.
Configuring sound system settings like volume offset and dual zone audio output.
Controls for subwoofer output and the Supreme setting to enhance audio quality.
Automatic muting of audio during incoming calls.
How to navigate and select various setup items and functions within the unit's menu.
Detailed setup for speaker placement, size, crossover frequencies, and time alignment.
Adjusting speaker positioning for optimal listening experience, including preset and manual settings.
Adjusting equalizer settings, including preset Q settings, frequency bands, and quality.
Adjusting WOW HD sound enhancement features like Focus, TruBass, and SRS 3D.
Saving and recalling customized DSP settings for audio preferences.
Recalling previously saved audio presets and settings from memory.
Changing the display mode to customize how information is presented.
Selecting display modes and configuring which function statuses are shown.
Choosing different graphic displays such as spectrum analyzers or wallpapers.
Selecting and configuring text display elements for various sources.
Details on the information displayed for Tuner, CD, and Audio file sources.
Customizing the font color and outline color for the display text.
Changing the icon display for sources, text labels, and album art.
Selecting G-Analyzer display modes and using it as a stopwatch.
Measuring and displaying vehicle horsepower and max power.
Resetting G-Analyzer values and calibrating G-Counter levels.
Calibrating the G-Analyzer for horizontal acceleration and braking.
Entering vehicle weight for accurate horsepower calculation.
Selecting vehicle class for horsepower calculation.
Attaching custom titles to stations or discs.
Adjusting the angle of the unit's panel for optimal viewing.
Instructions on how to detach and reattach the front faceplate for security.
How to select the tuner source and switch between FM/AM bands.
Choosing between automatic seek, preset seek, and manual tuning modes.
Entering frequencies directly to tune into stations.
Saving favorite stations to memory and automatic station preset entry.
Recalling previously stored stations from memory.
Searching for radio stations based on their program type.
Registering a program type for stations that do not have PTY data.
Preserving PTY settings and scrolling radio text information.
Instructions for inserting and playing CDs and audio files from various media.
Procedure for safely ejecting a disc from the unit.
Connecting and controlling USB devices, iPods, and accessing internal memory files.
Using external disc players and basic media playback controls like pause and play.
Steps to safely remove a USB device from the unit.
Searching for devices in a card reader and fast forwarding/reversing playback.
Navigating through music, discs, folders, and albums for content selection.
Methods for directly searching music tracks or discs by number.
Configuring playback functions like Repeat Play and Scan Play for CDs and audio files.
Selecting specific music files for playback from the current device or media.
Scrolling displayed CD text, audio file text, or MD titles.
Information on storing audio files in the unit's internal memory.
Important notes on recording/copying, including handling interruptions and resume functions.
Process for compressing and storing music CDs into the internal memory.
Options for setting the recordable time (Standard, Long Play, Super Long Play) for CDs.
Steps to name recorded files and folders, including auto-naming conventions.
Initiating the recording process and procedures for canceling it.
Process for copying audio files and folders from a USB device to internal memory.
Procedure for canceling the file copying operation from USB.
Steps for selecting and deleting audio files or folders from the internal memory.
Procedure for canceling the file deletion operation.
How to select the Satellite Radio tuner as the audio source.
Setting seek modes (Channel/Preset) and navigating between channels.
Searching for channels based on category and specific channel numbers.
Selecting preset bands and storing channels into memory.
Tuning into specific channels using direct access methods.
Recalling preset channels and scanning receivable channels for a short period.
Scrolling channel names and other text information for Satellite Radio.
Selecting the HD Radio source and tuning into FM/AM stations.
Explanation of how to navigate the unit's menu system and adjust settings.
Setting a 4-digit security code to prevent unauthorized use of the unit.
Procedure to clear or deactivate the previously set security code.
Customizing source selection display and setting iPod operation method.
Setting touch feedback sound and adjusting the clock manually.
Setting the current date, including month, day, and year.
Setting the date format and synchronizing the unit's clock with RDS station time.
Managing display illumination and the Disabled System Indicator (DSI).
Automatically dimming the display when vehicle lights are turned on.
Adjusting display contrast and enabling display mode switching.
Configuring Dual Zone audio and adjusting external amplifier bass boost levels.
Controlling the built-in amplifier and setting BMS frequency offset.
Controlling connected LX AMP units and managing automatic traffic information bulletins.
Using CRSC to reduce multi-path noise in FM reception.
Setting HD Radio receive modes and displaying the Electronic Serial Number (ESN).
Customizing auxiliary input display and naming stations/discs.
Setting the scrolling behavior for displayed text.
Configuring built-in auxiliary input and CD read settings for playback.
Downloading custom wallpapers to the unit's display.
Stopping the picture downloading process.
Displaying the current firmware version of the unit.
Performing a format to delete all audio files stored in internal memory.
Enabling or disabling the unit's demonstration mode.
Instructions for installing and replacing batteries in the remote control.
Overview of key remote control buttons like VOL, SRC, and ATT.
Using the remote for audio adjustments and Dual Zone System control.
Remote control functions specific to Tuner, Disc/USB/iPod, Satellite Radio, and HD Radio sources.
List of included accessories and step-by-step installation instructions.
Specific guidance for connecting an iPod using the KCA-iP200 accessory.
Detailed diagram and instructions for connecting all necessary wires to the unit's terminals.
Installation procedures specifically for non-Japanese vehicles.
Installation procedures tailored for Japanese vehicles, including screw usage.
Instructions on how to remove the hard rubber frame from the unit.
Securing the faceplate to the main unit and detaching the entire unit.
Addresses common issues related to source switching, equalizer, WOW HD, Dual Zone, and security code settings.
Diagnosing problems related to Tuner, Disc, Audio File, HD Radio, and USB device sources.
Explains error messages like Hold Error, Eject, No Disc, TOC Error, Read Error, and others.
Addresses issues with device detection, file compatibility, download errors, and writing errors.
Technical specifications for FM/AM tuners, CD player, and USB interface.
Technical details for audio output, auxiliary input, and general unit characteristics.
