Kenwood eXcelon KDC-X991 User Manual

8
|
English
General features
Power
Turning ON the Power
Press the [SRC] button.
Turning OFF the Power
Press the [SRC] button for at least 1 second.
Selecting the Source
There are two types of source selection methods
depending on the setting.
SRC Select mode 1:
1 Press the [SRC] button.
2 Turn the Control knob or push it towards left or
right.
3 Press the Control knob.
SRC Select mode 2:
Press the [SRC] button.
Source required Display
Satellite radio (Optional accessory) "SAT"
Tuner or HD Radio (Optional accessory) "TUNER" or "HD Radio"
USB device (iPod) "USB" ("iPod")
Internal Memory "Internal Memory"
CD "Compact Disc"
External disc (Optional accessory) "CD Changer"
Auxiliary input "AUX"
Auxiliary input (Optional accessory) "AUX EXT"
Standby (Illumination only mode) "STANDBY"
⁄
• When connection of the iPod is recognized, the source
display changes from "USB" to "iPod".
• Switch between SRC Select mode 1 and 2 in <Source
Select mode> (page 46).
• USB (iPod) or Internal Memory source is recognized as
CD source on the connected unit.
ATT VOL
FNC
SRC

Control knob
Release button
ATT indicator
Function icon
B64-3767-0000KEnglish.indd8B64-3767-0000KEnglish.indd8 07.5.102:15:41PM07.5.102:15:41PM

Kenwood eXcelon KDC-X991 Specifications

FM Tuner Section

frequency range	87.9 MHz – 107.9 MHz
usable sensitivity	9.3 dBf (0.8 μV/75 Ω)
quieting sensitivity	15.2 dBf (1.6 μV/75 Ω)
frequency response	30 Hz – 15 kHz
signal to noise ratio (MONO)	70 dB
selectivity	≥ 80 dB
stereo separation	40 dB

AM Tuner Section

frequency range	530 kHz – 1700 kHz
usable sensitivity	28 dBμ (25 μV)

CD Player Section

spindle speed	1000 – 400 rpm (CLV 2times)
frequency response	10 Hz – 20 kHz
total harmonic distortion	0.008 %
signal to noise ratio	110 dB
dynamic range	93 dB

USB Interface

usb standard	USB 1.1/ 2.0
maximum supply current	500 mA
file system	FAT16/ 32

Audio Section

maximum output power	50 W x 4
full bandwidth power	22 W x 4
speaker impedance	4 – 8 Ω
tone action band 1	60 – 200 Hz ±9 dB
tone action band 2	250 – 1k Hz ±9 dB
tone action band 3	1.25k – 4k Hz ±9 dB
tone action band 4	5k – 16k Hz ±9 dB
preout level / load	5000 mV/10 kΩ
preout impedance	≤ 80 Ω

Auxiliary Input

frequency response	20 Hz – 20 kHz
input maximum voltage	1200 mV
input impedance	100 kΩ

General

operating voltage	14.4 V
current consumption	10 A
installation size	182 x 53 x 155 mm
weight	3.31 lbs (1.5 kg)