Kenwood eXcelon KDC-X991 User Manual

18
|
English
General features
Display Type A/ Display Type B/ Display Type C/
Display Type D
Text Display Selection
Changing the text display.
1 Enter Text Display Selection mode
Using the Control knob, select "DISPLAY" >
"TEXT".
For the operation method, refer to <Function
Control mode> (page 11).
2 Select the text
Turn the Control knob or push it towards left
or right.
See <The text display> (page 18).
Select the row (only for display type with
multiple rows)
Push the Control knob towards up or down.
The cursor (‰) moves to the selected text display
part.
3 Exit Text Display Selection mode
Press the Control knob.
⁄
• When LX-AMP is connected, the item setup by the
Display mode of LX-AMP is displayed. (Other than B-3 or
C-3 display mode)
• When the music number exceeds 1000, only the last 3
digits of its number are displayed.
• Music title, Artist name, and Album name cannot be
displayed in WAV file.
• When playing music from iPod or music edited by "Music
Editor", the folder name display may show something
different such as playlist or artist name depending on
the music selection procedure.
• Same information cannot be displayed in text display
part. However, the blank display is able to have multiple
selections.
• If the selected display item does not have any
information, alternative information is displayed. May be
blank depending on the displayed row.
The text display
In Tuner source
Information Display Condition
Station name preset "SNPS"
134
Title & Artist name* (FM) "Title/Artist"
134567
Station name* (FM) "Station Name"
134567
Radio text plus* (FM) "Radio Text Plus"
134567
Radio text (FM) "Radio Text"
134567
Frequency "Frequency"
14
Spectrum Analyzer & Clock "Speana/Clock"
345
Clock "Clock"
17
Date "Date"
1345 7
Blank "Blank"
1345 7
* Information of Radio text plus is displayed.
In CD & External disc source
Information Display Condition
Disc title "Disc Title"
134567
Track title "Track Title"
134567
Track number & Play time "P-Time"
14
Disc name preset "DNPS"
1345 7
Spectrum Analyzer & Clock "Speana/Clock"
345
Clock "Clock"
17
Date "Date"
1345 7
Blank "Blank"
1345 7
In Audio file source
Information Display Condition
Music title & Artist name "Title/Artist"
134567
Album name & Artist name "Album/Artist"
134567
Folder name "Folder Name"
134567
File name "File Name"
134567
Play time & Music number "P-Time"
14
Spectrum Analyzer & Clock "Speana/Clock"
345
Clock "Clock"
17
Date "Date"
1345 7
Blank "Blank"
1345 7
In Standby
Information Display Condition
Standby "Source Name"
14
Clock "Clock"
1345 7
Date "Date"
1345 7
Blank "Blank"
1345 7
B64-3767-0000KEnglish.indd18B64-3767-0000KEnglish.indd18 07.5.102:15:46PM07.5.102:15:46PM

Kenwood eXcelon KDC-X991 Specifications

FM Tuner Section

frequency range	87.9 MHz – 107.9 MHz
usable sensitivity	9.3 dBf (0.8 μV/75 Ω)
quieting sensitivity	15.2 dBf (1.6 μV/75 Ω)
frequency response	30 Hz – 15 kHz
signal to noise ratio (MONO)	70 dB
selectivity	≥ 80 dB
stereo separation	40 dB

AM Tuner Section

frequency range	530 kHz – 1700 kHz
usable sensitivity	28 dBμ (25 μV)

CD Player Section

spindle speed	1000 – 400 rpm (CLV 2times)
frequency response	10 Hz – 20 kHz
total harmonic distortion	0.008 %
signal to noise ratio	110 dB
dynamic range	93 dB

USB Interface

usb standard	USB 1.1/ 2.0
maximum supply current	500 mA
file system	FAT16/ 32

Audio Section

maximum output power	50 W x 4
full bandwidth power	22 W x 4
speaker impedance	4 – 8 Ω
tone action band 1	60 – 200 Hz ±9 dB
tone action band 2	250 – 1k Hz ±9 dB
tone action band 3	1.25k – 4k Hz ±9 dB
tone action band 4	5k – 16k Hz ±9 dB
preout level / load	5000 mV/10 kΩ
preout impedance	≤ 80 Ω

Auxiliary Input

frequency response	20 Hz – 20 kHz
input maximum voltage	1200 mV
input impedance	100 kΩ

General

operating voltage	14.4 V
current consumption	10 A
installation size	182 x 53 x 155 mm
weight	3.31 lbs (1.5 kg)