EasyManuals Logo
Home>Kenwood>Car Receiver>eXcelon KDC-X991

Kenwood eXcelon KDC-X991 User Manual

Kenwood eXcelon KDC-X991
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #55 background imageLoading...
Page #55 background image
English
|
55
In HD Radio source
[FM] button
Selects the HD FM band.
Each time you press the [FM] button, the band
alternates between the HF1, HF2, and HF3 bands.
[AM] button
Selects the HD AM band.
[4]/ [¢] buttons
Tunes up or down bands.
[0] — [9] buttons
Press buttons [1] — [6] to recall preset stations.
In Satellite radio source
[FM] button
Selects the preset band.
[4]/ [¢] buttons
Searches up or down channels.
[0] — [9] buttons
Press buttons [1] — [6] to recall preset channels.
[DIRECT] button
Enters and cancels the <Direct Access Tuning>
(page 41) mode.
In Disc/USB (iPod)/Internal Memory
source
[4]/ [¢] buttons
Going forwards and backwards between music.
[
+]/ [] buttons
Going forwards and backwards between disc/
folders.
[38] button
Each time you press the button, the music is played
or paused.
[0] — [9] buttons
When in <Direct Music Search> (page 32) and
<Direct Disc Search> (page 32), enters the music/
disc number.
In Tuner source
[FM]/ [AM] buttons
Selects the band.
Each time you press the [FM] button, the band
alternates between the FM1, FM2, and FM3 bands.
[4]/ [¢] buttons
Tune up or down band.
[0] — [9] buttons
Press buttons [1] — [6] to recall preset stations.
[DIRECT] button
Enters and cancels the <Direct Access Tuning>
(page 27) mode.
[38] button
Enters and cancels the <PTY (Program Type)>
(page 28) mode.
Dual Zone System
[2-ZONE] button
Each time you press the button, "2 ZONE" of
<Audio Setup> (page 10) is turned ON or OFF.
[5]/ [] buttons
Adjusts the volume of the rear channel.
The rear channel activates while the Dual Zone
System is ON.
Audio Control
[AUD] button
Selects the Audio item to be adjusted.
[VOL] buttons
Adjusts the Audio item.
Refer to <Audio Control> (page 9) for the operation
method, such as the procedures for Audio control and
others operations.
B64-3767-0000KEnglish.indd55B64-3767-0000KEnglish.indd55 07.5.102:16:08PM07.5.102:16:08PM

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kenwood eXcelon KDC-X991 and is the answer not in the manual?

Kenwood eXcelon KDC-X991 Specifications

FM Tuner Section IconFM Tuner Section
frequency range87.9 MHz – 107.9 MHz
usable sensitivity9.3 dBf (0.8 μV/75 Ω)
quieting sensitivity15.2 dBf (1.6 μV/75 Ω)
frequency response30 Hz – 15 kHz
signal to noise ratio (MONO)70 dB
selectivity≥ 80 dB
stereo separation40 dB
AM Tuner Section IconAM Tuner Section
frequency range530 kHz – 1700 kHz
usable sensitivity28 dBμ (25 μV)
CD Player Section IconCD Player Section
spindle speed1000 – 400 rpm (CLV 2times)
frequency response10 Hz – 20 kHz
total harmonic distortion0.008 %
signal to noise ratio110 dB
dynamic range93 dB
USB Interface IconUSB Interface
usb standardUSB 1.1/ 2.0
maximum supply current500 mA
file systemFAT16/ 32
Audio Section IconAudio Section
maximum output power50 W x 4
full bandwidth power22 W x 4
speaker impedance4 – 8 Ω
tone action band 160 – 200 Hz ±9 dB
tone action band 2250 – 1k Hz ±9 dB
tone action band 31.25k – 4k Hz ±9 dB
tone action band 45k – 16k Hz ±9 dB
preout level / load5000 mV/10 kΩ
preout impedance≤ 80 Ω
Auxiliary Input IconAuxiliary Input
frequency response20 Hz – 20 kHz
input maximum voltage1200 mV
input impedance100 kΩ
General IconGeneral
operating voltage14.4 V
current consumption10 A
installation size182 x 53 x 155 mm
weight3.31 lbs (1.5 kg)

Related product manuals