Kenwood eXcelon KDC-X991 User Manual

English
|
29
• The Program Type can be put in the preset memory and
recalled quickly. Refer to the <Program Type preset>
(page 29).
3 Search for the selected Program Type station
Push the Control knob towards [4] or [¢].
When you want to search for other stations, push
toward [4] or [¢] of the Control knob again.
⁄
• When selected Program Type is not found, "No PTY" is
displayed. Select another Program Type.
4 Exit PTY mode
Press the Control knob.
Registration of a station as a PTY
Registering a Program Type for stations with no PTY
data.
1 Receive the station you want to register
2 Select the Program Type to register
Refer to <PTY (Program Type)> (page 28).
3 Register the Program Type
Press the [AUTO] button for at least 2 seconds.
Confirming the Program Type
Press the [AUTO] button.
The Program Type is displayed for 5 seconds.
4 Exit PTY mode
Press the Control knob.
Program Type preset
Putting the Program Type in the Preset button
memory and quick recall.
Presetting the Program Type
1 Select the Program Type to preset
Refer to <PTY (Program Type)> (page 28).
2 Enter Program Type preset mode
Press the [FNC] button.
3 Select the number you want to put in the
memory
Turn the Control knob or push it towards left
or right.
4 Preset the Program Type
Press the Control knob for at least 1 second.
5 Exit Program Type preset mode
Press the [FNC] button.
Recalling the preset Program Type
1 Enter PTY mode
Refer to <PTY (Program Type)> (page 28).
2 Enter Program Type preset mode
Press the [FNC] button.
3 Select the number you want to recall from the
memory
Turn the Control knob or push it towards left
or right.
4 Recall the Program Type
Press the Control knob.
5 Exit Program Type preset mode
Press the [FNC] button.
Radio Text Scroll
Scrolling the displayed Radio text, Title/Artist name,
Station name or Radio text plus.
Push the Control knob toward up for at least 2
seconds.
⁄
• When the <Display Illumination Control> (page 47) is set
to OFF, the display may black out while scrolling.
B64-3767-0000KEnglish.indd29B64-3767-0000KEnglish.indd29 07.5.102:15:53PM07.5.102:15:53PM

Kenwood eXcelon KDC-X991 Specifications

FM Tuner Section

frequency range	87.9 MHz – 107.9 MHz
usable sensitivity	9.3 dBf (0.8 μV/75 Ω)
quieting sensitivity	15.2 dBf (1.6 μV/75 Ω)
frequency response	30 Hz – 15 kHz
signal to noise ratio (MONO)	70 dB
selectivity	≥ 80 dB
stereo separation	40 dB

AM Tuner Section

frequency range	530 kHz – 1700 kHz
usable sensitivity	28 dBμ (25 μV)

CD Player Section

spindle speed	1000 – 400 rpm (CLV 2times)
frequency response	10 Hz – 20 kHz
total harmonic distortion	0.008 %
signal to noise ratio	110 dB
dynamic range	93 dB

USB Interface

usb standard	USB 1.1/ 2.0
maximum supply current	500 mA
file system	FAT16/ 32

Audio Section

maximum output power	50 W x 4
full bandwidth power	22 W x 4
speaker impedance	4 – 8 Ω
tone action band 1	60 – 200 Hz ±9 dB
tone action band 2	250 – 1k Hz ±9 dB
tone action band 3	1.25k – 4k Hz ±9 dB
tone action band 4	5k – 16k Hz ±9 dB
preout level / load	5000 mV/10 kΩ
preout impedance	≤ 80 Ω

Auxiliary Input

frequency response	20 Hz – 20 kHz
input maximum voltage	1200 mV
input impedance	100 kΩ

General

operating voltage	14.4 V
current consumption	10 A
installation size	182 x 53 x 155 mm
weight	3.31 lbs (1.5 kg)