English
|
11
TEL Mute
The audio system automatically mutes when a call
comes in.
When a call comes in
"CALL" is displayed.
The audio system pauses.
Listening to the audio during a call
Press the [SRC] button.
The "CALL" display disappears and the audio system
comes back ON.
When the call ends
Hang up the phone.
The "CALL" display disappears and the audio system
comes back ON.
⁄
• To use the TEL Mute feature, you need to hook up
the MUTE wire to your telephone using a commercial
telephone accessory. Refer to <Connecting Wires to
Terminals> (page 57).
Function Control mode
To set up various functions of this unit, select tree-
structured function items.
1 Enter Function Control mode
Press the [FNC] button.
2 Select your desired setup item
Select a setup item using the Control knob.
Operation type Operation
Movement between items Turn the Control knob.
Selection of item Press the Control knob.
Return to previous item Press the [FNC] button.
Functions of items are as follows:
Display Icon Function of setup item
"Menu" "MENU" Allows you to set up the environment.
Refer to <Menu system> (page 44).
"DSP" "DSP" Sets the DSP function. Refer to page 12
to page 16.
"Display Select" "DISPLAY" Allows you to set up the display. Refer
to page 16 to page 23.
"Angle Adjust" "ANGLE" Allows you to set the panel angle. Refer
to <Angle Control> (page 24).
"Preset Memory" "P.MEMORY" Allows you to put stations in the
memory. Refer to <Station Preset
Memory> (page 27).
"File Scan" etc. "SCAN" etc. Allows you to set how to play the CD
and audio file. Refer to <Play function
of CD and Audio file> (page 33).
"Return"
"
"
Returns to the previous item.
3 Select an option for the selected item
Refer to the related pages for the operation of
each option.
4 Exit Function Control mode
Press the [FNC] button for at least 1 second.
B64-3767-0000KEnglish.indd11B64-3767-0000KEnglish.indd11 07.5.102:15:42PM07.5.102:15:42PM
To Next Page
Loading...
Need help?
FM Tuner Section
