Kenwood eXcelon KDC-X991 User Manual

30
|
English
CD/Audio file (USB/iPod/Internal Memory) control features
Playing CD & Audio file
When there is no disc inserted
1 Open the panel
Press the [0] button.
2 Insert a disc.
¤
• When the faceplate slides open, it might interfere with
the shift lever or other vehicle function. If this happens,
pay attention to safety and move the shift lever or take
an appropriate action to remove the obstacle, then
operate the unit.
• Insert the disc horizontal to the slot. If you insert the Disc
as you push down on the Disc, it may scratch the Disc.
⁄
• For the audio files and discs you can play with this unit,
refer to <About Audio file> (page 5).
• When a disc is inserted the "IN" indicator is ON.
When a disc is inserted
Press the [SRC] button.
Select the "Compact Disc" display.
Refer to <Selecting the Source> (page 8).
Eject the disc
1 Eject the disc
Press the [0] button.
2 Return the panel to the original position
Press the [0] button.
⁄
• You can eject the disc for 10 minutes after switching off
the engine.

D
FNC SRC

Control knob
Function icon
File number
IN indicator
Folder number Play time
B64-3767-0000KEnglish.indd30B64-3767-0000KEnglish.indd30 07.5.102:15:54PM07.5.102:15:54PM

Kenwood eXcelon KDC-X991 Specifications

FM Tuner Section

frequency range	87.9 MHz – 107.9 MHz
usable sensitivity	9.3 dBf (0.8 μV/75 Ω)
quieting sensitivity	15.2 dBf (1.6 μV/75 Ω)
frequency response	30 Hz – 15 kHz
signal to noise ratio (MONO)	70 dB
selectivity	≥ 80 dB
stereo separation	40 dB

AM Tuner Section

frequency range	530 kHz – 1700 kHz
usable sensitivity	28 dBμ (25 μV)

CD Player Section

spindle speed	1000 – 400 rpm (CLV 2times)
frequency response	10 Hz – 20 kHz
total harmonic distortion	0.008 %
signal to noise ratio	110 dB
dynamic range	93 dB

USB Interface

usb standard	USB 1.1/ 2.0
maximum supply current	500 mA
file system	FAT16/ 32

Audio Section

maximum output power	50 W x 4
full bandwidth power	22 W x 4
speaker impedance	4 – 8 Ω
tone action band 1	60 – 200 Hz ±9 dB
tone action band 2	250 – 1k Hz ±9 dB
tone action band 3	1.25k – 4k Hz ±9 dB
tone action band 4	5k – 16k Hz ±9 dB
preout level / load	5000 mV/10 kΩ
preout impedance	≤ 80 Ω

Auxiliary Input

frequency response	20 Hz – 20 kHz
input maximum voltage	1200 mV
input impedance	100 kΩ

General

operating voltage	14.4 V
current consumption	10 A
installation size	182 x 53 x 155 mm
weight	3.31 lbs (1.5 kg)