Kenwood eXcelon KDC-X991 - Tuner Features - Tuning and Modes; Tuning Stations and Selecting Bands; Tuning Mode Selection

26
|
English
Tuner features
Tuning
Selecting the station.
1 Select tuner source
Press the [SRC] button.
Select the "TUNER" display.
Refer to <Selecting the Source> (page 8).
2 Select the band
Push the Control knob towards [FM] or [AM].
Each time you push the knob toward [FM], it
switches between the FM1, FM2, and FM3 bands.
3 Tune up or down band
Push the Control knob towards [4] or [¢].
⁄
• During reception of stereo stations the "ST" indicator is
ON.
Tuning Mode
Choose the tuning mode.
Press the [AUTO] button.
Each time you press the button, the Tuning mode
alternates between the modes shown in the table
below.
Tuning mode Display Operation
Auto seek "Seek Mode:
Auto1"
Automatic search for a station.
Preset station seek "Seek Mode:
Auto2"
Search in order of the stations in
the Preset memory.
Manual "Seek Mode:
Manual"
Normal manual tuning control.
FM
AM

D
FNC SRC AUTO/AME
Control knob
ST indicator
Band display Preset station number Frequency display
Function icon
B64-3767-0000KEnglish.indd26B64-3767-0000KEnglish.indd26 07.5.102:15:51PM07.5.102:15:51PM