J
John AnthonySep 12, 2025
What does 'NO ENTRY' mean on Kenwood Car Receiver?
- JJay FisherSep 12, 2025
If the Kenwood Car Receiver displays “NO ENTRY”, there is no registered device connected/found via Bluetooth.
To Next PageTo Next PageWhat does 'NO ENTRY' mean on Kenwood Car Receiver?
If the Kenwood Car Receiver displays “NO ENTRY”, there is no registered device connected/found via Bluetooth.
General| MP3 playback | Yes |
|---|---|
| Audio formats supported | AAC, MP3, WAV, WMA |
| Tuner type | HS-IV |
| FM band range | 87.5 - 108 MHz |
| LW band range | 153 - 279 kHz |
| Supported radio bands | AM, FM, LW, MW |
| Preset stations quantity | 24 |
| Display type | Fluorescent |
| Display digits | 21 digits |
| Display technology | LCD |
| Bluetooth version | 2.1+EDR |
| Bluetooth profiles | A2DP, AVRCP, HFP, OPP, PBAP, SPP |
| Line outputs (RCA) | 1 |
| USB ports quantity | 2, 1 |
| DIN size | 1 DIN |
| Impedance | 30 Ω |
| Product color | Black |
| Volume control | Rotary |
| Disc types supported | CD-R, CD-RW |
| Audio output channels | 4.0 channels |
| Maximum power per channel | 50 W |
| Signal-to-Noise Ratio (SNR) | 105 dB |
| Cables included | DC |
| Speaker type | 2-way |
| Output voltage | 2.5 V |
| Phonebook capacity | 5 entries |
| Operating temperature (T-T) | -0 - 40 °C |
Weight and Dimensions| Weight | 1300 g |
|---|---|
| Dimensions (WxDxH) | 182 x 53 x 159 mm |
Instructions for cleaning the unit, connector, and handling discs.
Procedures for searching and tuning radio stations, including auto and manual methods.
How to connect and use USB devices for audio playback.
Guidelines for connecting and controlling iPod and iPhone devices.
Connecting the microphone and pairing Bluetooth devices for the first time.
Advanced equalizer settings including bass boost, loudness, and preset EQs.
Troubleshooting steps for sound problems and unit malfunctions.
Solutions for errors related to CD and USB playback.
Step-by-step guide for installing the unit into the vehicle dashboard.
Overview of the fundamental steps for unit installation and wiring.
