To Next PageTo Next PageHow to reduce echo during phone calls on my Kenwood KDC-BT460U Car Receiver?
If you are experiencing echo or noise during phone conversations with your Kenwood Car Receiver, try adjusting the microphone unit’s position. You can also check the [ECHO CANCEL] setting.
How to fix Kenwood KDC-BT460U when no sound can be heard?
If you cannot hear any sound from your Kenwood Car Receiver, there are a couple of things you can try. First, make sure that the volume is adjusted to an audible level. Also, check the cords and connections to ensure they are properly connected. Another thing you can try is to clean the connectors.
What to do if Kenwood Car Receiver displays “UNRESPONSIVE DEVICE”?
If your Kenwood Car Receiver displays the message “UNRESPONSIVE DEVICE”, ensure that the USB device is not malfunctioning and then reattach it.
Why is sound interrupted during Bluetooth playback on my Kenwood KDC-BT460U?
If the sound is being interrupted or skipped during playback from a Bluetooth audio player on your Kenwood Car Receiver, try the following: 1. Reduce the distance between the unit and the Bluetooth audio player. 2. Turn off and then turn on the unit, and try to connect again. 3. Be aware that other Bluetooth devices might be trying to connect to the unit.
What to do if “READING” keeps flashing on Kenwood KDC-BT460U?
If “READING” keeps flashing on your Kenwood Car Receiver, avoid using too many hierarchical levels and folders. You can also try reloading the disc or reattaching the USB device.
What does “NO DEVICE” mean on Kenwood Car Receiver?
If “NO DEVICE” appears on your Kenwood Car Receiver, connect a USB device and then switch the source to USB again.
What does “UNSUPPORTED DEVICE” mean on my Kenwood Car Receiver?
If the message “UNSUPPORTED DEVICE” appears on your Kenwood Car Receiver, verify that the connected USB device is compatible with the unit and that the file systems are in a supported format. If needed, reattach the USB device.
What to do if Kenwood Car Receiver says USB port is drawing too much power?
If your Kenwood Car Receiver indicates that the USB port is drawing more power than the design limit, turn the power off and unplug the USB device. Then, turn the power back on and reattach the USB device. If the problem persists, turn the power off and on again, or reset the unit before trying a different USB device.
How to fix Bluetooth pairing issues with Kenwood KDC-BT460U Car Receiver?
If you're having trouble pairing your Kenwood Car Receiver with a Bluetooth device, ensure that you've entered the same PIN code on both devices. If the problem continues, delete the existing pairing information from both the unit and the Bluetooth device, and then attempt the pairing process again.
Why is my Kenwood KDC-BT460U not detecting Bluetooth devices?
If your Kenwood Car Receiver is not detecting any Bluetooth devices, try searching for the device again. If that doesn't work, reset the unit.
General| Brand | Kenwood |
|---|---|
| Model | KDC-BT460U |
| Category | Car Receiver |
| Channels | 4 |
| RMS Power Output | 22W |
| Peak Power Output | 50W |
| Bluetooth | Yes |
| USB Port | Yes |
| AUX Input | Yes |
| AM/FM Tuner | Yes |
| Display Type | LCD |
| MP3 Playback | Yes |
| WMA Playback | Yes |
| AAC Playback | Yes |
| WAV Playback | Yes |
| FLAC Playback | Yes |
| Pre-out Voltage | 2.5V |
| Speaker Impedance | 4-8 Ohms |
| Frequency Response | 20Hz - 20kHz |
| CD Player | Yes |
| Equalizer | 13-Band |
| Button Illumination | Variable |
Terms and conditions for using the embedded software.
Defines the scope and limitations of software usage rights.
Covers copyright, indemnification, and third-party liability.
Details termination conditions and export controls.
Copyright and usage terms for jansson and CJSON components.
Copyright and usage terms for various libraries and components.
Statement of compliance with EU directives for radio equipment.
Statement of compliance with UK regulations for radio equipment.
Guidance on interpreting manual symbols and references.
Identification of the unit's front panel components.
Setting language, clock, date, and demo mode.
Configuring speaker crossover settings for optimal sound.
Finding FM/AM radio stations and saving presets.
Adjusting seek mode, mono, news, regional, AF, and PTY search.
How to insert CDs and connect USB devices.
Controls for playing audio files from CD/USB and navigating.
Using the auxiliary input for portable audio players.
Installing the app and pairing the device for remote control.
Steps to pair your phone or audio device via Bluetooth.
Details on supported Bluetooth profiles and codecs.
Handling incoming, ongoing, and missed phone calls.
Adjusting microphone gain, noise reduction, and echo cancellation.
Dialing, accessing contacts, and voice commands.
Using voice commands and saving contacts to memory.
Playing music from Bluetooth audio devices.
Checking connectivity of Bluetooth profiles.
Adjusting EQ, bass, loudness, and sound effects for personalized audio.
Configuring speaker sizes, crossover frequencies, and phase.
Optimizing sound stage by setting speaker delay and volume.
Setting screen brightness and dimmer for day/night.
Configuring text scrolling and clock display behavior.
Crucial safety advice for electrical connections and mounting.
Steps for mounting the unit in the vehicle's dashboard.
Detaching the unit and wiring external components.
Pinout, connection details, and model-specific wiring.
Information on playable and unplayable media formats.
Cleaning instructions for the unit and connectors.
Common problems with sound, wiring, and radio reception.
Solutions for playback, device, and pairing errors.
Problems with controlling devices and connection stability.
Technical details for radio tuner and CD playback performance.
Technical data for USB, AUX input, and Bluetooth connectivity.
