M
michael75Sep 9, 2025
What does 'PAIRING NG' mean on Kenwood KDC-U549BT Car Receiver?
- KKelsey FreemanSep 9, 2025
The message 'PAIRING NG' on your Kenwood Car Receiver indicates a pairing error.
To Next PageTo Next PageWhat does 'PAIRING NG' mean on Kenwood KDC-U549BT Car Receiver?
The message 'PAIRING NG' on your Kenwood Car Receiver indicates a pairing error.
What does 'DEVICE FULL' mean on Kenwood KDC-U549BT Car Receiver?
The message 'DEVICE FULL' on your Kenwood Car Receiver means that the maximum number of Bluetooth devices (5) have already been registered, and no more can be added.
What to do if my Kenwood Car Receiver radio reception is poor?
If you're experiencing poor radio reception or static noise with your Kenwood Car Receiver, try these steps: * Ensure the antenna is firmly connected. * Extend the antenna fully.
How to fix Kenwood KDC-U549BT Car Receiver when sound cannot be heard?
If you cannot hear any sound from your Kenwood Car Receiver, try the following: * Adjust the volume to a suitable level. * Check the connections of the cords.
What does 'COPY PRO' mean on Kenwood KDC-U549BT Car Receiver?
The message 'COPY PRO' on your Kenwood Car Receiver indicates that a copy-protected file is being played.
What does 'NO PHONEBOOK' mean on Kenwood KDC-U549BT Car Receiver?
The message 'NO PHONEBOOK' on your Kenwood Car Receiver indicates that there is no data contained in the phone book.
What does 'NA FILE' mean on my Kenwood KDC-U549BT?
The message 'NA FILE' on your Kenwood Car Receiver indicates that the unit is attempting to play an unsupported audio file.
Why does my Kenwood Car Receiver say 'IN' flashes?
The flashing 'IN' on your Kenwood Car Receiver indicates that the CD player is not operating correctly. Reinsert the disc properly. If the condition does not improve, it may require professional attention.
What does 'TOC ERROR' mean on my Kenwood KDC-U549BT Car Receiver?
The 'TOC ERROR' message on your Kenwood Car Receiver suggests an issue with the disc. This can occur if: * The CD is quite dirty. * The CD is upside-down. * The CD is scratched a lot. Try using another disc instead.
What does 'NO MUSIC' or 'ERROR 15' mean on Kenwood Car Receiver?
The message 'NO MUSIC' or 'ERROR 15' on your Kenwood Car Receiver indicates that the connected USB device or inserted SD card does not contain playable audio files. Ensure that the media played has data recorded in a format that the unit can play.
General| Brand | Kenwood |
|---|---|
| Model | KDC-U549BT |
| Category | Car Receiver |
| Language | English |
