To Next PageTo Next PageWhat to do if my Kenwood Car Receiver displays “MISWIRING CHECK WIRING THEN PWR ON”?
If your Kenwood Car Receiver shows the message “MISWIRING CHECK WIRING THEN PWR ON”, turn the power off. Then, carefully inspect the speaker wires to ensure the terminals are properly insulated. After checking, turn the power back on.
Why is there no sound coming from my Kenwood KMM-202 Car Receiver?
If you can't hear any sound from your Kenwood Car Receiver, try these steps: first, adjust the volume to the optimal level. If that doesn't work, check all the cords and connections to ensure they are properly connected.
What does “PROTECTING SEND SERVICE” mean on my Kenwood KMM-202 Car Receiver?
If your Kenwood Car Receiver displays “PROTECTING SEND SERVICE”, send the unit to the nearest service center.
Why can't I hear sound during playback on my Kenwood Car Receiver?
If you cannot hear sound during playback on your Kenwood Car Receiver, try the following: 1. Reconnect the Android device. 2. If in [HAND MODE], launch any media player application on the Android device and start playback. 3. If in [HAND MODE], relaunch the current media player application or use another media player application. 4. Restart the Android device. If the issue continues, the connected Android device may be unable to route the audio signal to the unit.
What to do if there is no sound because Kenwood KMM-202 Car Receiver does not turn on?
If you cannot hear any sound because your Kenwood Car Receiver does not turn on, try resetting the unit.
How to fix no sound on my Kenwood KMM-202 Car Receiver?
If you can't hear any sound from your Kenwood Car Receiver, first, make sure the volume is at an audible level. If that's not the issue, check all the cords and connections to ensure they are properly connected.
What to do if my Kenwood KMM-202 playback is intermittent or sound skips?
If the playback on your Kenwood Car Receiver is intermittent or the sound skips, turn off the power saving mode on the Android device.
General| MP3 playback | Yes |
|---|---|
| CD-R playback | No |
| Audio formats supported | FLAC, MP3, WAV, WMA |
| AM band range | 531 - 1611 kHz |
| FM band range | 87.5 - 108 MHz |
| LW band range | 153 - 279 kHz |
| Supported radio bands | FM, LW, MF |
| Preset stations quantity | 24 |
| DIN size | 1 DIN |
| RDS features | EON |
| Product color | Black |
| Volume control | Rotary |
| Frequency range | 20 - 20000 Hz |
| Audio output channels | 4.0 channels |
| Removable front panel | Removable |
| Equalizer bands quantity | 3 |
| Maximum power per channel | 50 W |
| Mobile operating systems supported | Android, iOS |
| Display type | LCD |
| Display digits | 13 digits |
| Illumination color | White |
| USB version | 2.0 |
| USB ports quantity | 1 |
| Pre-out channels | 2 SW |
| File format system | FAT 12/16/32 |
| Power requirements | 14.4 V DC, 10 A |
| Key illumination color | Red |
| Cables included | DC |
| Operating temperature (T-T) | -10 - 60 °C |
Weight and Dimensions| Weight | 600 g |
|---|---|
| Dimensions (WxDxH) | 182 x 107 x 53 mm |
To ensure proper use, please read through this manual before using this product.
Do not operate any function that takes your attention away from safe driving.
Adjust volume to hear outside sounds; lower volume for digital sources to prevent speaker damage.
Guides users through setting the display language and disabling the demonstration mode.
Instructions for setting the current time and date on the unit.
Steps for configuring initial system settings like audio controls and source preferences.
Initiates playback automatically when a device is connected.
Choose control method for devices and select music storage drive.
Steps to install the app, create an account, and begin Pandora streaming.
Solutions for general issues, poor radio reception, and USB/iPod connection errors.
Troubleshoot Android connection problems, Pandora errors, and call handling.
Critical safety precautions and general cautions for installing the unit.
Step-by-step guide to physically install the unit in a vehicle.
Detailed instructions for installing the unit into the vehicle's dashboard.
Illustrates how to connect the unit's wires to the vehicle's electrical system.
