Kenwood KRF-V5200D Instruction Manual

English
17
Speaker setting flow
The detailed settings below allow you to enjoy full performance
of the receiver according to the environment of your listening
room.
Speaker settings consist of 4 elements.
Speaker Setup ("SP SETUP") *
Select whether each speaker channel is used or, if used, its size.
The Easy Setup function also allows you to make speaker settings
easier.
See <Speaker setup (Easy Setup)> ^
Test Tone ("TEST TONE") *
Select the output level from each speaker.
Distance ("DISTANCE") (
Select the distance between each speaker and the listening
position.
Low Frequency Effects Level ("LFE LVL") (
Select the level of bass audio enhancement.
Low Frequency Effect channel delivers separate non-directional
bass signals to the subwoofer for more dynamic deep bass sound
effects.
Speaker settings completed!
Getting into the setup mode
The setup procedure is identical for all of the setting elements.
Once you remember the following procedure, you can easily set
up other setting elements.
MULTI CONTROL
SETUP
SETUP
MULTI CONTROL
/O
œ Press [SETUP] to enter the setup mode.
∑ Use [MULTI CONTROL 5/∞] to select the element to
setup.
Display Selection
"SP SETUP" Speaker setup
"TEST TONE" Test tone
"DISTANCE" Distance
"LFE LVL" Low frequency effects level
"EXIT" Exit the setup mode.
é Press [SETUP] to get into the setup mode of the
selected element.
To exit the setup mode
Select "EXIT" in the step ∑ and press [SETUP].
B60-5676-0000.indd17B60-5676-0000.indd17 07.4.129:57:18AM07.4.129:57:18AM

Kenwood KRF-V5200D Specifications

General

Brand	Kenwood
Model	KRF-V5200D
Category	Stereo Receiver
Language	English