To Next PageTo Next PageWhat does it mean if the clock oscillation amplitude is weak in Kenwood NXR-800?
If the clock oscillation amplitude is weak, it suggests the drive circuit in IC34 of your Kenwood Repeater is malfunctioning.
What does it mean if clock oscillation amplitude is weak for IC324 in Kenwood NXR-800 Repeater?
If the clock oscillation amplitude is weak, it indicates that the drive circuit for IC324 in your Kenwood Repeater is malfunctioning.
What does it mean if IC34 shows 5 VDC in Kenwood NXR-800?
If the voltage measures 5 VDC, then IC34 in your Kenwood Repeater is malfunctioning.
Lists essential safety guidelines for operating the equipment, including antenna proximity and grounding.
Provides general information on servicing the transceiver and refers to relevant sections for detailed procedures.
Covers the preface and connection procedure for programming the NXR-800 via PC.
Details PC connection, firmware programming steps, and cable specifications for the NXR-800.
Details the mounting and connection of the KXK-3 OCXO unit.
Provides step-by-step instructions for connecting the KES-5 external speaker, including terminal manipulation.
Details the internal/external reference, 19.2MHz PLL reference, modulation PLL, DDS, and main PLL circuits of the transmitter unit.
Details the step-by-step alignment procedures for various NXR-800 parameters, including VCO lock voltage and deviation.
General