Kenwood PS Series User Manual

4) Notes on power off procedure
When the power of the PS Series is turned off with the POWER switch on it, the
ALARM LED on the front panel goes on, which does not mean a trouble or
abnormality of the PS Series. If the power is turned on again with the
ALARM LED lighting, the ALARM LED keeps lighting and operation of the PS
Series is disabled. Before turning on the power again, be sure to confirm
that the ALARM LED is off.
The ALARM LED goes on.
Before turning on the power again,
be sure to confirm that the ALARM LED is off.
15
Trun the power off with the POWER switch.

Kenwood PS Series Specifications

General

Category	Power Supply
Manufacturer	Kenwood
Input Frequency	50/60 Hz
Dimensions	Varies by model
Weight	Varies by model
Output Voltage	Adjustable
Line Regulation	≤0.01% + 3mV
Load Regulation	≤ 0.01% + 3 mV
Ripple and Noise	≤1mVrms
Display	Digital LED
Model	PS Series
Protection	overvoltage, overtemperature
Input Voltage	100/110/120/220/230/240 VAC (depending on the model and region)