Kenwood PS Series User Manual

3. SPECIFICATIONS
^~~^^-^_PSmodel names
Items ~~ "—
8-60
6-120
10-35 10-70
20-18
20-36
20-54 36-10
36-20 36-30 60-6
60-12
60-18
Output
Output voltage range
0 to 6V
0 to 10V
0 to 20V
0 to 36V 0 to 60V
Set voltage resolution
(Theoretical value)
10 turns, 0.017% of rated voltage
Output current range 0 to 60A
0 to 120A
0 to 35A 0 to 70A
0 to 18A
0 to 36A
0 to 54A
0 to 10A 0 to 20A
0 to 30A
0 to 6A 0 to 12A 0 to 18A
Set current resolution
(Theoretical value)
10 turns, 0. 017% of rated current
Constant-voltage characteristics
Line regulation
0. 05% of full scale + 5 mV for ±10% variation of supply voltage
Load regulation
0.1% of full scale +5 mV for 0 to 100% variation of output current
Ripple
noises
P-P
(Typical; Note 1)
lOOmV
150mV
lOOmV
Ripple
noises
Effective value
(5 to 1MHz)
lOmV rms
15mV rms
lOmV rms 15mV rms lOmV rms 15mV rms 20mV rms
Transient response (Typical)
1 ms
2ms 1ms
2ms 1ms 2ms
Temperature coefficient
(Typical)
±100ppm/°C
Rise time
Fully loaded/no load: 80 ms/80 ms
Fall time
Fully loaded/no load: 150 ms/lOOOms
Remote control
External voltage: 0 to approx. 10 V, external resistor ®: 0 to approx. 10 kQ, external resistor ®:
00
to 0 Q,
output voltage: 0 to full scale
Constant-current characteristics
Line regulation
125mA
245mA
75mA 150mA
41mA
82mA 123mA
25mA 50mA 75mA
17mA 34mA
51mA
Line regulation
For ±10% variation of supply voltage
Note 1: Switching noises measured by the 20 MHz osci1loscope.
5

Kenwood PS Series Specifications

General

Category	Power Supply
Manufacturer	Kenwood
Input Frequency	50/60 Hz
Dimensions	Varies by model
Weight	Varies by model
Output Voltage	Adjustable
Line Regulation	≤0.01% + 3mV
Load Regulation	≤ 0.01% + 3 mV
Ripple and Noise	≤1mVrms
Display	Digital LED
Model	PS Series
Protection	overvoltage, overtemperature
Input Voltage	100/110/120/220/230/240 VAC (depending on the model and region)