Kenwood PS Series User Manual

4. PRECAUTIONS FOR USE
1) Checking the supply voltage
*Use the PS Series within the rated supply voltage range.
The power rating of the PS Series is 90 to 132/180 to 250 VAC, single-phase,
50/60 Hz.
'<The rated voltage is indicated on the rating plate beside the power input
terminals on the rear panel.
*The supply voltage rating (100 VAC range or 200 VAC range) is set in the
factory. If you want to change the factory-set rating, please contact
your dealer or our distributor.
2) Connecting the power cord
Use the power cord included in the accessories. Screw it onto the power input
terminals, then be sure to put the protection cover onto the terminal block.
10
WARNING

Kenwood PS Series Specifications

General

Category	Power Supply
Manufacturer	Kenwood
Input Frequency	50/60 Hz
Dimensions	Varies by model
Weight	Varies by model
Output Voltage	Adjustable
Line Regulation	≤0.01% + 3mV
Load Regulation	≤ 0.01% + 3 mV
Ripple and Noise	≤1mVrms
Display	Digital LED
Model	PS Series
Protection	overvoltage, overtemperature
Input Voltage	100/110/120/220/230/240 VAC (depending on the model and region)