Kenwood PS Series User Manual

5. PANEL EXPLANATION
5-1 Front Panel
©POWER switch
Press this switch, and the internal sub-power supply is turned on and the
main AC relay is activated in approx. a second (switch depressed). Press it
again, and the internal sub-power supply is turned off and the main AC relay
is deactivated (switch released).
©Voltmeter
Displays output voltage and set voltage. Also displays the polarity.
©Ammeter
Displays output current and set current. No polarity display.
©VOLTAGE control
Controls voltage of constat-voltage operation. Clockwise rotation increases
set voltage.
©CURRENT control
Controls current of constant-current operation. Clockwise rotation increases
set current.
16

Kenwood PS Series Specifications

General

Category	Power Supply
Manufacturer	Kenwood
Input Frequency	50/60 Hz
Dimensions	Varies by model
Weight	Varies by model
Output Voltage	Adjustable
Line Regulation	≤0.01% + 3mV
Load Regulation	≤ 0.01% + 3 mV
Ripple and Noise	≤1mVrms
Display	Digital LED
Model	PS Series
Protection	overvoltage, overtemperature
Input Voltage	100/110/120/220/230/240 VAC (depending on the model and region)