To Next PageTo Next Page
Why can't I change the frequency using RIT/XIT on my Kenwood TS-990S?
If the frequency cannot be changed with the RIT or XIT control, press [RIT] or [XIT] because the RIT/XIT function may be active.
What to do if the linear amplifier does not behave with my Kenwood Transceiver?
If the linear amplifier is not working, securely connect the amplifier to the REMOTE connector. Review the configuration for Data VOX and the input signal level. Select 'Active High + Relay Control' for the linear amplifier control from Advanced Menu 11.
How to fix incorrect screen display during power up on my Kenwood TS-990S?
If screens do not appear correctly during power up, reset the transceiver.
Why is the S meter performance dull in FM mode on my Kenwood Transceiver?
If the S meter performance is dull in FM mode, select 'High' for the S meter sensitivity in Menu 0-08.
How to adjust excessive treble and bass filtering in SSB mode on my Kenwood TS-990S Transceiver?
If the treble and bass of the received audio in SSB mode are excessively filtered, change the configurations for the RX DSP filter to better match the operating environment.
General| Receiver Type | Triple Conversion Superheterodyne |
|---|---|
| Antenna Tuner | Built-in automatic antenna tuner |
| DSP | Yes |
| IF DSP | Yes |
| Modes | SSB, CW, AM, FM |
| Display | 7-inch TFT color LCD |
| Weight | 25 kg (55.1 lbs) |
| Antenna Connectors | SO-239 |
| Power Supply | 13.8V DC |
