ALJ/ALS/PLJ/PLS-BA-e-1640 43
9.1 Weighing unit
According to requirements the balance can be switched-over into different units (in
verified balances not all the units are available, see chap. 1 „Technical
specifications). Selected weighing unit will be retained even after disconnection from
the mains.
In weighing mode press the MENU button and keep it pressed until the acoustic
signal gets mute. The first menu item „units“ is displayed.
Acknowledge using PRINT button, the current setting is displayed.
Press the arrow keys to select desired setting.
Scroll forward using MENU button
Scroll backward using CAL button
Take over selection using the PRINT button.
Weighing balance returns to menu. Either make more settings in the menu or go
back to weighing mode as follows.
Press the MENU button and keep it pressed until the acoustic signal gets mute.
The balance returns automatically into weighing mode.
Symbol Weighing unit Conversion
factor 1g =
* not available in all models
To Next Page
Loading...
Need help?
General
