KERN ALJ Series - Numeric Entering of the Reference Weight

ALJ/ALS/PLJ/PLS-BA-e-1640 57
10.1.3 Numeric entering of the reference weight
If you know the reference weight/piece you can enter this via the numeric keyboard.
 In weighing mode press MENU button. The first menu item „count“ is displayed.
 Acknowledge using PRINT button, the current reference quantity is displayed.
 Press the arrow buttons   to select the parameters manually.
 Acknowledge using PRINT button
 Press the arrow buttons    to enter the known reference weight.
 If using a weighing container, put this before pressing the PRINT button.
The taring process is automatically started. „0-t“ is displayed.
 Place load on pan and read the number of pieces.
 Press MENU button, the total weight of the placed parts is displayed.
 Back to quantity display press MENU button again.
Return to weighing mode
 Press the ON/OFF key