KERN ALJ Series - Page 139

ALJ/ALS/PLJ/PLS-BA-e-1640 61
 The display for weight determination of the "glass sinker in air“ appears.
 Confirm by pressing the PRINT button.
 Tare if necessary and hook on the glass sinker centrically.
 Wait until the weight display of the weighing balance has become stable and
then press the PRINT button. „WEI AIR“ appears flashing.
 The display for weight determination of the "glass sinker in sample liquid“
appears.
 Acknowledge using PRINT button
 Tare if necessary and immerse the sinker into the measuring fluid
 Wait until the weight display of the weighing balance has become stable and
then press the PRINT button. „WEI LIQ“ appears flashing.
 The density of the sample fluid is shown
Return to weighing mode
 Press the ON/OFF key
 or use the MENU button to start a new measuring cycle.
If at the density determination errors have appeared, „d-----„ is displayed.