KERN CME 100-3 User Manual

CDE/CME/CDEE-BA-e-1014
34
12 Counting system CDEE
12.1 Introduction
A counting system allows the construction of a dual balance assembly for piece
counting.
The KERN Scale CDE is used as quantity scale for the determination of the piece
number/piece weight.
The high resolution of Kern scale KERN CME allows a very precise determination of
the reference weight for items of low weight.
The weight of quantity must be determined till to the maximum of the CME on the
reference balance.
If the value is > max of the CME, the CDE can be used.
Information:
User instructions for the counting system are given below. A detailed description of
the weighing scale's operation can be found in the previous chapters.
12.2 Technical data
Counting
system
Quantity scale Reference scale
KERN KERN
Weigh-
ing
range
(max)
kg
Legibility
(d)
g
KERN
Weigh-
ing range
(max)
g
Legibility
(d)
g
Minimum
piece
weight
g/item
CDEE 35K0.001 CDE 35K1 35 1 CME 100-3 100 0,001 0,002
CDEE 35K0.01 CDE 35K1 35 1 CME 300-2 300 0,01 0,02
CDEE 35K0.01L CDE 35K1L 35 1 CME-300-2 300 0,01 0,02
CDEE 60K0.01 CDE 60K2 60 2 CME 300-2 300 0,01 0,02
CDEE 60K0.01L CDE 60K2L 60 2 CME 300-2 300 0,01 0,02
CDEE 150K0.1 CDE 150K5 150 5 CME 3000-1 3000 0,1 0,2
12.3 Basic structure
The counting system consists of the following components:
• Quantity scale KERN CDE
• Reference scale KERN CME
• Interface cable CDE-A01

KERN CME 100-3 Specifications

General

Brand	KERN
Model	CME 100-3
Category	Scales
Language	English