KERN EMB Service Manual

1 Basic Information
Grundlegende Hinweise
The device must be repaired only by trained specialist staff or personnel with
professional formation (such as a repair-specialist accredited by law
concerning verification).
The service manual is obligatory for repair work.
After repair, original conditions of the device have to be restored.
Only original spare parts should be used.
Das Gerät darf nur von geschultem oder beruflich ausgebildetem
Fachpersonal (z. B. eichrechtlich anerkannter Instandsetzer) repariert werden.
Die Serviceanleitung ist bindend für Reparaturen.
Das Gerät muss nach erfolgter Reparatur wieder in den Originalzustand
zurückversetzt werden.
Es dürfen nur Originalersatzteile verwendet werden.
2 Features
• Auto zero
• Full Tare function
• 4 weighing units
• Display segment test function
• Negative value indication
• Auto off function (battery mode only, enable / disable)
• Zero tracking enable / disable
• Two types of Digital Auto Calibration
• Solder pads to prevent end-user internal calibration
• Low battery indicator
• Overload protection / indication
• AC adaptable
• Operated by 2 x AA size alkaline batteries (EMB220-1, EMB2200-0, EMB5.2K5),
9V battery (EMB100-3, EMB200-2, EMB600-2, EMB1000-2, EMB500-1, EMB1200-1,
EMB5.2K1)
EMB-SH-e-0933
3

KERN EMB Specifications

General

Calibration	External
Display	LCD
Weighing Plate Material	Stainless steel
Weighing Units	g, oz
Interface	RS232
Protection Class	IP54