EOC-BA-e-1610 17
2.2.1 Numerical input via the navigation buttons
Press , the current setting will be displayed. The first digit will be flashing
and is ready for changing.
If you do not wish to change the first digit, press , the second digit will start
flashing.
Each time you press , the display will move to the subsequent digit, after
the last digit the display will return to the first digit.
To change the selected (flashing) digit, press repeatedly until the desired
value is displayed. Then press
to access further digits and change them by
.
Complete your entry by .
To Next Page
Loading...
