EOC-BA-e-1920 27
7.5 Simple weighing
Place load – Wait for stability display – Read-off weighing result.
Overload warning
Overloading exceeding the stated maximum load (max) of the device, minus a
possibly existing tare load, must be strictly avoided. This could damage the
instrument.
Exceeding the maximum load is indicated by the display
and an audio sound. Unload weighing system or reduce preload.
7.6 Switch-over weighing unit
Enable weighing unit:
Call-up menu item „P5 Unt“, see chap. 8.2
Press and the first weighing unit with the current
setting will be displayed.
Use to enable (on) or to disable (oFF) the
displayed unit.
Acknowledge with . The display change
automatically to the next unit.
Use to enable (on) or to disable (oFF) the
displayed unit.
Repeat sequence for each weighing unit.
Return to weighing mode using
To Next Page
Loading...
Need help?
General
