EOC-BA-e-1920 47
9.4 Error messages
Excess load if weight exceeds capacity of +9d
Underweight (less than 20 d)
The weight is too low (less than -20 d)
Zero setting range exceeded on start-up of balance.
Zero setting range during start-up of weighing scale or on
pressing of exceeded.
Is displayed on setting weighing scale to zero with ,
without load
For parts counting and percentage calculation:
Weighed value < zero
For add-up:
Total number of weighings above 999
For add-up:
Total weight above 999999
Adjustment failed
Keyboard locked
Keyboard unlocked
Capacity of batteries exhausted.
(Battery voltage below 5.7 V, automatic shutdown
happens at less than 5.4 V)
Should other error messages occur, switch balance off and then on again. If the error
message remains inform manufacturer.
To Next Page
Loading...
Need help?
General
