KERN EW 4200-2NM - Page 5

EW/EG-N/EWB-e-1627
5
KERN EG 2200-2NM EG 4200-2NM EW 120-4NM
Readout 0,01 g 0,01 g 0,0002 g
Verification value (e) 0,1 g 0,1 g 0,001 g
Weighing range (max.) 2200 g 4200 g 120 g
Class of accuracy II II I
Taring range (subtractive) 2200 g 4200 g 120g
Minimum load (Min) 0,5 g 0,5 g 0,02 g
Minimum weight for counting
parts
0,01 g 0,01 g -
Reference quantity 10, 30, 50, 100 10, 30, 50, 100 -
Reproducibility 0,01 g 0,01 g 0,0002 g
Linearity ± 0, 02 g ± 0,02 g ± 0,0008 g
Adjusting weight internal internal
-
Test weight, included - -
50 g (F1)
Recommended adjusting
weight, not included (class)
- - 100g (E2)
Stabilization time 3 sec. 3 sec. 3 sec.
Weighing plate stainless steel 180 x 160 mm 180 x 160 mm Ø 80 mm
Weight kg (net) 3,7 3,7 2,4
Units,
verification switch in verification
position,(chap. 5.10)
g, ct
Units ,
verification switch not in verifica-
tion position,
(chap. 5.10)
g, ct, oz, lb, ozt, dwt, GN, tl (HongKong), tl (Taiwan),
tl (Singapore, Malaysia), momme, tola
Air humidity max. 80 % relative (not condensing)
Permissible ambient condition 10° C to 30° C
Balance dimensions
including draft shield
195 x 251 x 254
mm
Balance dimensions
excluding draft shield
190 x 265 x 90 mm
180 x 235 x 75
mm
Vibratory filter 4
Mains supply
Mains adapter 230 V, 50/60 Hz ; 9 V DC balance,
200 mA
Interface RS 232 C interfaced
Rechargeable battery optional
Underfloor weighing Hanging loop optional