The tare procedure can be repeated as often as desired, for example when weighing
several components into a mixture (weighing in).
Press the key to set the display to
”0.000".
The total weight of the container is re-
moved by taring.
Apply further components to the weigh-
ing container (weighing in).
Now read off the weight of the added
item to be weighed on the display.
Information:
The balance is only ever able to store one tare value.
The stored tare value is displayed prefixed by a minus sign when the balance is
empty.
Remove all items from the weighing plate in order to delete the stored tare value
and subsequently press the key.
The tare procedure can be repeated as often as desired. The limit has been
reached when the entire weighing range is used to full capacity.
To Next Page
Loading...
Need help?
General
