EWJ-BA-e-1917 25
7.8 Manual totalizing
With this function the individual weighing values are added into the summation
memory by pressing and edited, when an optional printer is connected.
The totalizing function is active at menu setting
„SALE-Mode no“, see chap. 8.2.
• For menu settings, see chapter 8.2:
„F3 COM“
„S 232“
„P Prt“
„SALE n“
• The totalizing function is not active when the weight is under 20d.
Add up:
Place item to be weighed A, e.g. 100 g.
Wait for stability display, then press . The weight value will be saved and
printed if an optional printer is connected. The number of weighings, followed by
the total weight will be indicated.
Remove the weighed good. More weighed goods can only be added when the
display ≤ zero.
To Next Page
Loading...
