EWJ-BA-e-1917 33
tP Standard printer setting
LP 50 Not documented
Acknowledge selection by .
Standard stetting English.
only displayed for setting „LP 50“
Not documented
Display speed
Non-verifiable models:
SPd 1
SPd n “Normal” SPd 2
SPd H “High” SPd 3
SPd 4
oFF Automatic adjustment switched off
Time interval after which the automatic adjustment
starts, selectable 1, 2, 3,4, 5, 6, 7, 8 hours.
P6 bAtt
bAttoF Mask loading status display „Recharg.battery“
bAtton Display loading status display „Recharg.battery“
SALE n
Sale mode no: d= 0.1g
SALE y
Sale mode yes: d= 0.01 g
The SALE mode is locked for balances with type approval.
To disable the access lock, destroy the seal and actuate the adjustment
switch. Position of the adjustment switch see chap. 6.11
Attention:
After destruction of the seal the balance must be re-verified by an authorised
agency and a new verification wire/seal mark fitted before it can be reused for
applications subject to verification.
To Next Page
Loading...
Need help?
General
