Acknowledge by [ ] button. The numeric input window
for the weight value of the adjustment weight appears.
The active digit is flashing.
Provide adjustment weight.
Enter weight value, numerical input see chap. 3.2.2
Acknowledge selection by [ ] button. < Zero >,
< Put ld > followed by the weight value of the adjust-
ment weight to be placed will be displayed.
Place the adjustment weight.
< wait> followed by < reMvld> will be displayed.
Once < reMvld> is displayed, remove the adjustment
weight.
After successful adjustment the balance automatically re-
turns to weighing mode.
In case of an adjustment error (e.g. objects on the weigh-
ing plate) the display will show the error message <
wrong>. Switch off balance and repeat the adjustment
process.
To Next Page
Loading...
